Servo 2 Pack

Two 42g, 58.3 oz-in, SC-0352 servos with horns and mounting screws. While supplies last.
SKU: 50-1006

Dimensions(mm): 40.7X20.2X39.4
Weight(g): 42.0
Speed(@4.8V sec/60): .16
Torque(@4.8V oz-in): 58.3
Speed(@6.0V sec/60): .13
Torque(@6.0V oz-in): 90.3
Gear: Industrial Plastic
Bearing: 2BB
Case: Plastic
25 Tooth Spline
Frequency: 200-250
Pulse Width Frequency: 1520
Running current (at no load): 180 mA @ 4.8V
Running current (at no load): 240 mA @ 6.0V
Stall current (at locked): 1300 mA @ 4.8V
Stall current (at locked): 1500 mA @ 6.0V
Idle current (at stopped): 5 mA @ 4.8V
Idle current (at stopped): 5 mA @ 6.0V
Limit angle: 180°±10°
Connector wire gauge: #26 AWG
Connector wire length: 250 ±5 mm
Horn gear spline: 25T
Control system: Pulse width modification
Amplifier type: Digital controller
Operating Travel: 120° (when1000→2000 μsec)
Neutral position: 1500 μsec
Dead band width: 5 μsec
Rotating direction: Counterclockwise (when1500→2000 μsec)
Pulse width range: 800→2200 μsec
Maximum travel: Approx 164°(when800→2200 μsec)

Customers who bought this item also bought

Color Sensor

The Modern Robotics Color Sensor detects the color of an object using reflected light or the color of light from an external light source. Great for detecting and tracking colored lines and determining the color of a lit object.

Core Motor Controller

The Core Motor Controller has two motor channels to connect and control two 9 - 15 volt DC motors, with optional encoders.

12V 3000mAh NiMH Battery

This size battery is the most popular battery for use in FIRST Tech Challenge. It has a Tamiya connector and a in-line 20A fuse.

12v 6mm Motor Kit with Powerpoles

12v 6mm DC motor with a built in encoder, encoder wire, and Anderson Powerpoles. Mounting bracket included.