Search
Filters
Close

2301 Series Brass, MOD 0.8, D-Bore, Set Screw Pinion Gear (6mm D-Bore, 30 Tooth)

This 30 tooth, MOD 0.8 gear will mate with any MOD 0.8 gear. However when building on pattern, the most common partners for this gear are another 30 tooth gear, or a 90 tooth hub gear. Utilizing a second 30 tooth gear will create a compact 1:1 ratio on a 24mm center distance. A 1:1 ratio is useful when you have an assembly where you want two pieces to move at the same time, but in opposite directions. Mating with a 90 tooth hub gear will create a 3:1 ratio on 48mm centers and can be used as an overdrive or underdrive.
SKU: 2301-0006-0030
$5.99

This 30 tooth, MOD 0.8 gear will mate with any MOD 0.8 gear.  However when building on pattern, the most common partners for this gear are another 30 tooth gear, or a 90 tooth hub gear.   Utilizing a second 30 tooth gear will create a compact 1:1 ratio on a 24mm center distance.  A 1:1 ratio is useful when you have an assembly where you want two pieces to move at the same time, but in opposite directions.  Mating with a 90 tooth hub gear will create a 3:1 ratio on 48mm centers and can be used as an overdrive or underdrive.

SPECS

Weight 24g
Material Brass
Tooth Count 30
Gear Pitch MOD 0.8
Pressure Angle 20 Degree

This 30 tooth, MOD 0.8 gear will mate with any MOD 0.8 gear.  However when building on pattern, the most common partners for this gear are another 30 tooth gear, or a 90 tooth hub gear.   Utilizing a second 30 tooth gear will create a compact 1:1 ratio on a 24mm center distance.  A 1:1 ratio is useful when you have an assembly where you want two pieces to move at the same time, but in opposite directions.  Mating with a 90 tooth hub gear will create a 3:1 ratio on 48mm centers and can be used as an overdrive or underdrive.

SPECS

Weight 24g
Material Brass
Tooth Count 30
Gear Pitch MOD 0.8
Pressure Angle 20 Degree

Master FTC Kit (2018 - 2019)

STEP File


Download
STEP Files
View in
OnShape

To utilize goBILDA parts in an onShape assembly, select import on the top left. Then go to the “Other Documents” tab. Type “goBILDA Kit of Parts”. Notice that some individuals have copied the goBILDA repository. These repos will not contain as many parts as the main branch. From here you can search parts and assemblies in the part library by part number. Notice that some parts that are very similar (all the 1102s) are grouped in a drop-down menu.

Smaller Packages:

  1100 Channel

  1101 U-Beams

  1102 4mm x 8mm Flat Beams

  1103 L-Beams

  1104 48mm x 2.5mm pattern plates

  1105 32mm x 2.5mm pattern plates

  1106 8mm x 8mm Square Beams

  1107 Low Side U-Channel

  1108 Flat Pattern Brackets

  1109 goRAIL

  1111 Angled Pattern Brackets

  1112 Low Side L-Channel

  1113 L-Channel

  1114 Flat Grid Brackets

  1115 U-Brackets

  1116 Grid Plates

  1119 8mm x 8mm Shaft Beams