Search
Filters
Close

24:1 Ratio Worm Gear Set

This worm gear set works with a 6mm D-shaft as the input to the worm and the brass worm gear is able to fasten to an output shaft using a clamping or set screw hub. The 24mm center distance between the worm and the mating worm gear makes 1120 Series U-Channel the ideal structure to house this gear set in.
SKU: 3204-0001-0001
$19.99

This worm gear set works with a 6mm D-shaft as the input to the worm and the brass worm gear is able to fasten to an output shaft using a clamping or set screw hub. The 24mm center distance between the worm and the mating worm gear makes 1120 Series U-Channel the ideal structure to house this gear set in.

This worm gear set works with a 6mm D-shaft as the input to the worm and the brass worm gear is able to fasten to an output shaft using a clamping or set screw hub. The 24mm center distance between the worm and the mating worm gear makes 1120 Series U-Channel the ideal structure to house this gear set in.

Master FTC Kit (2018 - 2019)

STEP File


Download
STEP Files
View in
OnShape

To utilize goBILDA parts in an onShape assembly, select import on the top left. Then go to the “Other Documents” tab. Type “goBILDA Kit of Parts”. Notice that some individuals have copied the goBILDA repository. These repos will not contain as many parts as the main branch. From here you can search parts and assemblies in the part library by part number. Notice that some parts that are very similar (all the 1102s) are grouped in a drop-down menu.

Smaller Packages:

  1100 Channel

  1101 U-Beams

  1102 4mm x 8mm Flat Beams

  1103 L-Beams

  1104 48mm x 2.5mm pattern plates

  1105 32mm x 2.5mm pattern plates

  1106 8mm x 8mm Square Beams

  1107 Low Side U-Channel

  1108 Flat Pattern Brackets

  1109 goRAIL

  1111 Angled Pattern Brackets

  1112 Low Side L-Channel

  1113 L-Channel

  1114 Flat Grid Brackets

  1115 U-Brackets

  1116 Grid Plates

  1119 8mm x 8mm Shaft Beams