Search
Filters
Close

Structure

View as
Sort by
Display per page

1106 SERIES 8mm x 8mm SQUARE BEAMS

8mm by 8mm square beam with a repeating 8mm pitch hole pattern. Repeating holes go completely through the part. Ends are threaded 12mm deep holes. Provides wonderful mounting options without sacrificing strength.

1107 SERIES LOW SIDE U-CHANNEL

With a thickness of 2.5mm, and height of 48mm, the Low Side U-Channel offers strength without taking up your valuable space.

1109 SERIES STANDARD GO-RAIL EXTRUSION

Use this 24mm by 24mm extrusion as a structural element, as part of a linear actuator, or to rotate and entire structure.

1116 SERIES GRID PLATES

2.5mm thick plate with 8mm pitch holes in both directions

1200 Series 24mm Base Pattern Mount

This pattern mount fastens to structure with the threaded posts and positions the pattern 24mm from the mounting surface. The 24mm bottom-to-center distance is crucial as it allows other structural components to properly align as well as provides the proper distance for gears to mesh and drive a rotating assembly. These mounts can be used as a simple connection point while building a chassis but are also an excellent choice for holding a bearing, hub, lead-screw nut, or tube off of the mating surface you’re building on.
$3.99

1400 Series Clamp Mount

The 1400 series clamps are available in a range of sizes to clamp motors, shafts and other parts.